2x2 Mechanical PM Fiberoptic Switch(Latching or Non Latching)

 

ACP’s PMS Series switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. At the same time, the polarization state of the signal is preserved.

 

Features

 

Applications

 

 

  • Unmatched Low Cost
  • Low Insertion Loss
  • High Channel Isolation
  • Highly Stable and Reliable
  • Epoxy Free Optical Path
  • Latching or Non-Latching
 
  • Configurable Optical Add/Drop
  • Optical Signal Routing
  • Optical Network Protectioni/Restoration
  • Transmitter and Receiver Protection
  • Network Test System
  • Instrumentation
   

 

Performance Specifications

 

Parameter

Specification

Operating Wavelength 1310 ± 40nm 1550 ± 40nm
Insertion Loss 0.8dB (Typ.), 1.2 dB (Max.)
Wavelength Dependent Loss ≤ 0.20dB
Extinction Ratio ≥ 18dB (20dB Typ.)
Channel Cross Talk ≥ 60dB
Return Loss ≥ 55dB
Repeatability ± 0.02dB
Switching Speed ≤ 10ms
Drive Voltage 4.5 - 5V
Durability (Cycles) 10 Million (Min.)
Optical Power 500mW
Operating Temperature 0 to +70°C
Storage Temperature -40 to +85°C
Package Dimensions L29mm x W15mm x H10mm
Note:
1. The PM fiber and the connector key are aligned to the slow axis.
2. The ER is for fiber 0.75 meter.  Increase fiber length can decrease the ER.
3. For devices with connectors, insertion loss will be 0.3dB higher, return loss will be 5dB lower, and extinction loss will be 2dB lower.
 
 

Electrical Pin Configuration

 

Optical Path

 

Port1 - Port3 and Port2 - Port4

Port1 - Port4 and Port1 - Port3

Electric Drive

Non - Latching     Pin1 Pin10
Latching Pin10 Pin6 Pin1 Pin5
  V+ GND V+ GND

Sensor Status

Non - Latching and Latching Pin2-3, Pin8-9 Closs Pin2-3, Pin8-9 Open
Pin3-4, Pin7-8 Open Pin3-4, Pin7-8 Closs

 

 

Parameter

Typical

Minmum

Maxmum

Switch Voltage

5V 4.5V 5.5V

Switch Current

> 40mA

Pulse Duration

> 25ms

 

 

Ordering Information

 

PMS

T TT TTTT T T T TT T
Option 
Operating  Wavelength
Port
Grade
Pigtail Style
Fiber Length
In/Out Connector
Working axis
L = Latching
N = Non - Latching

15 = 1510 - 1610nm
13 = 1260 - 1360nm

0202 = 2x2

P = P Grade

1 = Bare Fiber
2
= 900um Jacket

1 = 0.75m
2 = 1.0m
3 = 1.5m
S = Specify

0 = None
1 = FC/APC
2 = FC/PC
3 = SC/APC
4 = SC/PC
5 = ST
6 = LC/UPC
7 = LC/APC

S = Slow axis working
F = Fast axis working

 

icon pdf2x2 Mechanical PM Fiberoptic Switch





AC logo
| HOME | CONTACT | SALES REP | PRODUCTS MAIN PAGE |
e-mail: [email protected]
gif gif_03